What Does Your Firewood Heat Cost?
This tool was built by Serge (MSc) using established science and government sources. My academic background covers Biogeochemistry, Forest Science, Environmental Biology, and Plant Biology, and my field research directly measured soil carbon and tree growth in open-air experiments. My tools are for educational purposes and give practical guidance, not professional advice.
Two loads of firewood can cost the same and give you very different amounts of heat. A cord of dense hardwood can hold close to twice the energy of the same stack of light softwood, and wet wood spends part of its energy boiling off its own water.
So the price per load tells you very little on its own. What you want to know is the price of each unit of heat that reaches your room.
I built this tool to work that out. Enter your wood, your moisture meter reading, how you buy it and what you pay, and it gives you the cost of each kilowatt-hour of usable heat. Add your gas, oil or electricity prices and it puts them side by side.
How This Works
A stacked cord holds about 85 cubic feet of solid wood, with the rest air gaps. The tool takes the typical density of your chosen wood, works out how many kilograms of dry wood are in your load, and multiplies by the energy in dry wood, about 8,500 British thermal units per pound.
It then subtracts the energy needed to boil off the water in the wood, using your moisture meter reading, and applies the efficiency of your fireplace or stove. What is left is the heat that reaches your room, in kilowatt-hours. Divide the price by that and you have the cost of your heat.
For the comparison, the tool divides each price by the efficiency of a typical system: about 90 percent for a gas boiler, 85 percent for an oil boiler, 100 percent for direct electric heating and about 300 percent for a heat pump, which moves more heat than the electricity it uses.
Understanding Your Result
The cost per kilowatt-hour is the number to compare. It already allows for the wood type, the moisture and the stove, so two suppliers selling different woods at different prices become directly comparable.
The tool also shows how much more heat you would get from the same load at 20 percent moisture. For wetter wood, the true loss is often larger than this, because wet wood also burns cooler and less completely. If you spend a fortune on firewood and the house stays cold, wood type, moisture and stove efficiency are the three places to look.
The gross figure per cord lets you check your wood against published firewood tables, which usually list heat before stove losses.
Important Limitations
The density of each wood is a typical value, and individual trees vary. How tightly a load is stacked also changes how much solid wood you get. A loose cubic metre is taken as about 70 percent of the wood in a stacked one, and loose loads vary the most.
Stove efficiencies are typical figures, and your own will depend on the model, how you run it and how well your chimney draws. The tool only counts the energy used to boil off water, so for wood above about 25 percent the true penalty is usually bigger than shown.
Gas, oil and electricity efficiencies are also typical values. Use the result to compare options, not as an exact bill.
Scientific Basis
The wood densities come from the United States Department of Agriculture Forest Products Laboratory, whose Wood Handbook gives the specific gravity of common tree species, the measure of how much dry wood each holds per unit of volume.
The heat contents of the other fuels come from the United States Energy Information Administration: 100,000 British thermal units per therm of natural gas, 138,500 per gallon of heating oil and 3,412 per kilowatt-hour of electricity. The same source gives about 20 million British thermal units for an average cord of wood, which matches what this tool calculates for a medium-density wood.
- USDA Forest Products Laboratory, Wood Handbook (specific gravity of wood species)
- U.S. Energy Information Administration, British thermal units (Btu) (heat content of wood, gas, oil and electricity)
Related Reading
- Is Burning Wood Better for the Environment Than Gas? (the carbon side of the comparison)
- Firewood Quantity Calculator (how many cords you need for a winter)
- Firewood Moisture Target Checker (whether your reading is ready to burn)
This calculator is for general educational use. It gives an estimate to help you compare heating costs, and is not a substitute for professional advice on heating systems. Results depend on your own wood, stove and prices.







