Turn Your Soil Test Into Tonnes of Carbon
This tool was built by Serge (MSc) using established science and government sources. My academic background covers Biogeochemistry, Forest Science, Environmental Biology, and Plant Biology, and my field research directly measured soil carbon and tree growth in open-air experiments. My tools are for educational purposes and give practical guidance, not professional advice.
Soil carbon stock is the amount of organic carbon held in a layer of soil, usually given in tonnes per hectare. It depends on three things: how much carbon the soil holds, how dense the soil is, and how deep you measure.
Leave out any one of them and the number means very little. That is why soil carbon is so hard to measure well, and why a lab carbon percentage on its own cannot tell you how much carbon your field or garden stores.
I built this tool to turn a lab result into a stock in tonnes of carbon and tonnes of CO₂ per hectare. If you do not know your bulk density, it can work it out from a soil core. If you have two sampling dates, it compares the change by fixed depth and by equivalent soil mass.
How This Works
A soil carbon stock combines three measurements: the carbon concentration from the lab, the bulk density of the soil, and the depth of the layer. The tool multiplies them together and removes the share of the volume taken up by stones, which hold no organic carbon.
In practical units, carbon percent × bulk density in g/cm³ × depth in cm gives tonnes of carbon per hectare. To express it as carbon dioxide, the tool multiplies by 3.67, the ratio of the weight of a CO₂ molecule to the weight of its carbon.
If your lab reports organic matter rather than organic carbon, the tool uses the conventional factor of 0.58 to convert one to the other. The core helper divides the oven-dry weight of the soil by the volume of the core, which is how bulk density is defined.
With two samples, the tool calculates the change twice. The fixed-depth method compares the same depth both times. The equivalent soil mass method compares the same weight of soil both times, which removes the false change you get when the soil has become more or less compacted between samples.
Understanding Your Result
Most cultivated topsoils hold somewhere around 30 to 90 tonnes of carbon per hectare in the top 30 cm, with grassland, woodland and very organic soils often higher. The kilograms per square metre figure is the same result on a garden scale.
If you entered a texture, the tool also checks your bulk density against the levels at which soil becomes dense enough to hold back roots. A high reading is a sign of compacted soil, which affects plants as well as the carbon figure.
When you compare two samples, look closely if the two methods disagree. If the soil became denser, the fixed-depth method counts extra soil in the same depth and can show a gain that is not there. The equivalent soil mass result is the more reliable one, and I explain why in how deep a soil carbon sample should go.
Important Limitations
This is an estimate for one sampling point. Soil carbon varies a great deal across a field, even over a few metres, so a reliable figure needs many cores, mixed or averaged.
The 0.58 organic matter factor is a convention, and the true figure ranges from roughly 0.4 to 0.6 depending on the soil. The equivalent soil mass comparison here assumes carbon is spread evenly through the layer, which is a simplification.
The result is also only as good as the lab method and the bulk density. A small error in bulk density changes the stock as much as a small error in carbon percent.
Scientific Basis
The calculation follows the approach set out by the Food and Agriculture Organization of the United Nations, which defines soil organic carbon stock as the mass of organic carbon in a soil layer of known bulk density, expressed in tonnes per hectare for a set depth, with 0 to 30 cm as the standard reference layer and bulk density measured for every layer sampled.
The bulk density method and the compaction thresholds come from the United States Department of Agriculture's Natural Resources Conservation Service, which defines bulk density as the dry weight of soil divided by its volume, and gives the levels at which sandy, silty and clay soils start to restrict root growth.
- FAO, A protocol for measurement, monitoring, reporting and verification of soil organic carbon in agricultural landscapes (2020) (soil carbon stock, reference depth and equivalent soil mass)
- USDA NRCS, Soil Quality Indicators: Bulk Density (bulk density method and root-restricting levels)
Related Reading
- Soil Carbon & Bulk Density Tracker (many cores, several layers, a compaction check and fair comparisons over the years)
- What a Soil Carbon Credit Certifies, and What MRV Means (how stocks like this are used in carbon markets)
- What Is Soil Carbon Sequestration? (what I found when I measured it in a field experiment)
This calculator is for general educational use. It gives an estimate from the figures you enter and is not a substitute for professional soil sampling, laboratory analysis or a verified carbon audit.







